Copy of Professional Logo

 



 

 

Square Dust Collector For Filing- SQDC1
Square Dust Collector For Filing- SQDC1

SPECIFICATION OF SQDC 1:
Suction motor: 3/4 Hp, 440V
Starting Amp: 1.7Amp 
Running Amp: 1.1 Amp
Also available in single phase 220Volts
CFM : 250
Sound Level : 45db Approx.

FEATURES OF SQDC 1:
Strong Suction Motor
Single & Double Suction inlet available
Cloth filter bag of 5 to 10 micron with additional paper bag in which dust can be collected
Can be easily fitted under work bench
Down time for replacement of filter bag 5 minutes
PVC fitting & pipe will be provided with machine.
ln-built silencer for noise reduction
Locking facility
Very Silent machine
Dim : 15" x 22" x 16" (LxBxH) Approx.

 

LEG WASH FINAL
Foot Wash- FW1

SPECIFICATION OF FW1:
SS tank size: 3'x 18'x 9' (LxBxH)
Input: 220V AC/ 50Hz
Submersible Pump: 0.5 Hp

FEATURES OF FW1:
PVC Matt-1/2"(t)
Two SS partitions in the tank size approx. ( 18"x4")
Recycling of same water after filteration
Available in desired sizes as per your specification

Filing Table With Square Dust Collector- FTSQDC 1

SPECIFICATION OF FTSQDC 1:
Suction Motor : 3/4 Hp, 440V
Starting Amp : 1 .7 amp
Running Amp : 1.1Amp
Also available in single phase 220 Volts
CFM : 250
Sound Level : 45db Approx.
DIM: 26" X 27" X 54" (L X B X H)Approx.

FEATURES OF FTSQDC 1:
Filing Table with dust collector
Table covered with acrylic hood for greater suction
Acrylic hood foldable
Glass window for viewing product
Acrylic tray in drawer for better dust collection
Additional PVC flexible suction pipe can be provided below the Gibi (tongue of table) for tapping the gold dust at source & also can be used to clean the work bench & worker's hand
Very silent machine

 

NWSDC1
Wet Spure Grinding With Full Body Of SS- NWSDC1

SPECIFICATION OF NSWDC1:
Submersible pump 25 watts.
Grinding Motor 3/4 Hp 220 Volts single phase
Sound Level 30 db (approx)
Dim. 28”x26”x49”(LXBXH) Approx

FEATURES OF NWSDC1:
3/4 Hp grinding motor with S.S. Hood.
Water jet nozzle flexible pipe for water with control value.
Water contain in SS load
Exclusive wooden formica top with drawer.
S.S. setting tank for dust deposition with locking
Submersible pump for recycling water.
SS  mesh for filteration & nylon fabric filter as secondary filter .

mwg4
Four Station Multi Jet Grinding Machine-MWG4

SPECIFICATION OF MWG4:
Submersible pump 85 walt
Grinding motor 3/4HP 1 pH with spindies on both side.
Sound level: 25 db (appx)
Dim: 47" x25" x 50" (LBH) approx.

FEATURES OF MWG4:
3/4 HP grinding Motor with Spindles on the either side, two SS Hood on each side
Water Jet nozzle flexible pipe for water with individual control value
One wooden laminated top & settling tank for dust deposition plate inside an SS cabinet with locking facility.
Submersible pump for recycling water
SS mesh for Filtration & nylon fabric filter as secondary filter Four wheel arrangement two on either side
Variable control speed for motor
PL Light provided

 

Single Station Polishing Machine With Dust Collector- PDC1

SPECIFICATION OF PDC1:
Suction Motor : 3/4 hp, 440V
Starting Amp : 1.7 Amp
Running Amp : 1.1Amp 
Bench polisher : 3/4 hp,440V
Starting Amp : 2 Amp
Running Amp : 1.5 Amp 
Also available in single phase 220 volts CFM : 250
Sound Level : 68 db Approx.

FEATURES OF PDC1:
Strong suction motor.
Bench polishing motor.
On/Off switch.
Exclusive wooden laminated top with drawer & lock
Pocket cloth filter of 10 microns
Aerodynamically designed MS or Acrylic hood tapered for greater suction or Acrylic hood 
PL light with toggle switch on the hood
Foot shaker lever for dusting the dust in tray
ln-built silencer for noise reduction.
Locking facility
Suction jali Size: 9" x 6" for efficient collection
DIM: 28" x25" x48" (Lx B x H )Approx.

 

MP1 & LDC 1
Magnetic Polisher- MP1

SPECIFICATION OF MP 1: 
Power: 1/2 Hp 
3 Phase
Container available in two Sizes .7" Dia or 12" Dia
Weight: About 50 Kgs. approx.
Speed of Rotation: Variable speed option available
Dim: 15" x 15" x 22" (L xBxH) Approx.

FEATURES OF MP 1:
Magnetic Polisher for surface finishing
Powder coated MS body
Acrylic see through container, leak proof drive
Polishes the surfaces even where hands and tools cannot reach
SS pins spun around by powerful magnets
Automatically, alternates between clockwise and anti-clockwise directions

HW 2 & NFDC 1
Hand Wash With Two Taps-HW2

SPECIFICATION OF HW 2:
 lnput: 220V AC / 50 Hz
Pump Motor: 0.5 HP
Dim: 3" x 20" x 3" (L x B x H) approx.

FEATURES OF HW 2:
P.P body with S.S. wash basin & swiveling tap
PP Settling tank with pump & Cartridge filter
Level switch for auto operation
Cartridge filter of 5 to 8 micron
Machines available in desired sizes as per your specification.

No. 2 NVAC 100 & MINI VAC
Mini Vacuum Cleaner-MINI VAC 100

SPECIFICATION OF MINI VAC 100:
1/2 hp Carbon motor
1000 watts
Dim: 13" x 13" x 26" (LxBxH) Approx.

FEATURES OF MINI VAC 100:
Can be used for dry & wet application
Strong Suction 0.5 hp motor 220 volts
Easily movable on caster assembly
10 micron filters
Light in weight–about 9 kgs
Suitable for place where bigger vacuum machine cannot reach
Dust collection in the SS tank

 

pdc
Single Station Polishing Machine With Variable Speed & DC- PDC1+

SPECIFICATION OF PDC1+:
Suction Motor : 3/4 hp, 440V
Starting Amp : 1.7Amp
Running Amp : 1.1Amp
Bench polisher :3/4 hp,440V
Starting Amp : 2 Amp
Running Amp : 1.5 Amp
Also available in single phase 220Volts
Bench polishing motor with variable speed up to 4,500RPM (appx) & Lesser Torque CFM : 250
Sound Level : 68db. Approx.

FEATURES OF PDC1+:
This machine is specially design for ultimate final polish
Strong suction motor
Bench polishing motor
On/Off switch
Exclusive wooden laminated a top with drawer & lock
Pocket cloth filter of 10 microns
Aerodynamically designed MS or Acrylic hood tapered for greater suction
PL light with toggle switch on the hood
Foot shaker lever for dusting the dust in tray
ln-built silencer for noise reduction
Locking facility.
Suction jali Size: 9" x 6" for efficient collection DIM: 26" x24" x48" (Lx Bx H )Approx.

 

Air Purifier- AP100
Air Purifier- AP100

SPECIFICATION OF AP 100:
Dim: 18" x 15" x 35" ( Lx B x H ) Approx.
220 Volts
Sound Level: 50db Approx.

FEATURES OF AP 100:
Jewellery polishers generate dust during daily operation
Air purifier captures the air born dust
This dust is respirable & dangerous to jewellery polishers
Air Purifier reduces airborne particles
Creates a healthier work environment
Designed to capture dust produced in the jewellery industry
Very quiet ( 65db), easy to install on castor wheels.
Plugs into any 220Volt supply
Three stage filtration

 

Eight Station Dust Collector For Polishing- DC8
Eight Station Dust Collector For Polishing- DC8

SPECIFICATION FOR DC 8:
Suction Motor : 5 Hp, 440V
Starting Amp: 5 Amp
Running Amp: 4.6 Amp
Vibrator Motor: 1/4 hp, 440V
Starting Amp: 1 Amp
Running Amp: 0.6 Amp
CFM : 250 per station
Sound Level: 75 db Approx.

FEATURES FOR DC 8:
Strong suction motor
Pocket cloth filter of 10 micron
Motorized vibrator for dusting the dust in tray
ln-built silencer for noise reduction
Lockable tray for dust
DOL starter for motor
Six to Eight stations can be catered
8" dia suction
Dim: 3'x3'x6'.5" (LxBxH ) Approx.

 

Double Suction Dust Collector For Filing- DC2
Double Suction Dust Collector For Filing- DC2

SPECIFICATION OF DC2:
Suction motor: 3/4 Hp, 440 Volts
Starting Amp: 1.7 Amp
Running Amp: 1.1 Amp
CFM : 250
Sound Level : 68db Approx.

FEATURES OF DC2:
Strong suction motor
Single & Double Suction inlet available
Cloth filter bag of 5 to 10 micron with additional paper bag in which dust can be collected 
Can be easily fitted under work bench
Down time for replacement of filter bag 5 minutes
PVC fitting & pipe will be provided with machine
ln-built silencer for noise reduction. Locking facility.
Dim : 17"dia x18"ht. Approx.

 

photohug1
Work bench- WB1

SPECIFICATION OF WB 1:
Suction motor : 0.5 hp
440 volts OR 220 V
Sound level : 50 db (approx.)

FEATURES OF WB1:
Machine designed for filing or setting with suction.
Acrylic Hood with hand rest.
5 Micron cloth & paper filter for excellent & easy collection PL light with toggle switch on acrylic hood
Dim: 24" x30" x 48" (L X B X H)Approx.

 

NFTSQDC 1 & FTSQDC1
Filing Table of M.S & Square Dust Collector- NFTSQDC1

SPECIFICATION OF NFTSQDC 1:
Suction Motor: 3/4 hp, 440V
Starting Amp: 1 .7 amp
Running Amp: 1 .1 Amp
Also available in single phase 220 Volts
CFM: 250
Sound Level: 45db. Approx
DIM: 29" x28" x68' (L X B X H )Approx.

FEATURES OF NFTSQDC 1:
M.S.Table with powder coating
Stand for flexible shaft motor provided
Tube light provided with flexible arm
Slope in Table drawer for better collection
PVC flexible suction pipe for dust collector provided
Hood can be fully removed from the work place for more work space
Very silent machine
Drawer provided in the table for storage
DOL starter provided for dust collector

 

Sprue Grinding With Square Dust Collector-SSQDC1
Sprue Grinding With Square Dust Collector-SSQDC1

SPECIFICATION OF SSQDC 1:
Suction Motor : 3/4 hp, 440V
Starting Amp : 1 .7Amp
Running Amp : 1 .1Amp
Bench Grinder: 3/4 hp, 440V
Starting Amp : 2 Amp
Running Amp : 1 .5 Amp
Also available in single phase 220Volts
CFM : 250
Sound Level : 45 db Approx.

FEATURES OF SSQDC 1:
Strong suction motor
Bench polisher motor
Exclusive wooden formica top with drawer
Aerodynamically designed hood for greater suction
PL light with toggle switch.
Single inlet with dust collection bag
Cloth filter bag of 5 to 10 micron with additional paper bag in which dust can be collected Down time for replacement of filter bag 5 minutes
PVC fitting & pipe will be provided with machine
ln-built silencer for noise reduction
Locking facility
Very Silent machine
Dim: Dust collector of single suction 17" dia x l8"ht.Approx.
Dim: Table with Acrylic hood and polishing Motor27" x 23" x48" ( Lx Bx H)Approx.

 

Filing Dust Collector-FDC1

SPECIFICATION OF FDC 1:
Suction Motor: 3/4 Hp , 440 Volts or 220 Volts
Sound level: 50 db approx.
Dim: 25".75 x 27".75 x 49" (LxBxH) approx.

FEATURES OF FDC 1:
Machine designed for filing with suction
MS Hood with shutters which are openable
Primary & secondary filters (paper & Cloth) of 5 microns
Pl light with Switch
Machine has got deep base below the JB for proper filing & Dust Collection
Starter for motor operation.

 

No. 2 PDC1 & 2
Double Station Polishing Machine With Dust Collector-PDC2

SPECIFICATION OF PDC 2:
Suction Motor : 1.5 hp, 440V
Starting Amp : 2 Amp
Running Amp : 1.5 Amp
Bench polisher :3/4 hp, 440V
StartingAmp : 2 Amp
Running Amp : 1.5 Amp
Also available in single phase 220 volts
CFM: 250 per station
Sound Level : 68db Approx.
Dim: 51" x 28" x 48 " (LxBxH) Approx.

FEATURES OF PDC 2:
Strong suction motor
DOL starter
Bench polisher motors two nos.
Exclusive wooden formica top with two nos. of drawers
Pocket cloth filter of 10 micron
Aerodynamically designed MS or Acrylic hood tapered for greater suction
The size of the hood is big
More filter capacity
PL light with toggle switch on the hoods
Foot shaker lever for dusting the dust in tray
ln-built silencer for noise reduction
Locking facility
Suction jali Size: 9" x 6" for efficient collection

 

ldc1
SPLIT LAP WITH DUST COLLECTOR– LDC 1

SPECIFICATION OF LDC 1:
Suction Motor : 1/2hp, 440V 
Starting Amp : 1.7Amp
Running Amp : 1.1Amp
Split lap motor : 1/2hp, 440V
Starting Amp : 2Amp
Running Amp : 1.5Amp.
Also available in single phase 220Volts
CFM : 250
Sound Level : 50db. Approx.

FEATURES OF LDC 1:
Strong suction motor.
Split lap motor.
Exclusive wooden laminated top with drawer.
Pocket cloth filter of 5 to 10 micron.
30 degree angle for maximum visibility.
Foot shaker lever for dusting the dust in tray.
lnbuilt silencer for noise reduction.
Locking facility.
DIM :27" x23" x 47" (L x B x H)Approx.

 

Finishing Machine-NFDC1

SPECIFICATION OF NFDC1:
Dim: 27" x 30" x 47" (Lx B x H) approx
Suction Motor: 1/2 Hp, 440 V OR 220V
Sound Level: 65 db approx. 

FEATURES OF NFDC1:
Machine designed for finishing with foredom / micro motor or setting
MS Powder Coated Body & Hood with hand rest space
5 micron cloth & paper for excellent & easy collection
PL light with toggle switch on MS Hood

 

Large Vacuum Cleaner- NVAC100

SPECIFICATION OF NVAC 100:
1 Hp Two Motors in this machine
Power: 2300 Watts
Capacity: 55 Litres
Weight: 30 kgs
Dim: 340 mm x 940 mm (Dia x F.it.)

FEATURES OF NVAC 100:
Strong Suction 1 HP motor 220 volts
Heavy Duty
Powerful Suction
Dry & Wet Applications
Machine on castor wheels Corrosion resistant steel body

 

 

 

Miniature Polishing Dust Collector- P80

SPECIFICATION OF P 80:
RPM & Supply: 2800 RPM & 220 V
Dim: 22" x 12" x 18" (LxBxH) Approx.

FEATURES OF P 80:
This dust collector is extremely space efficient
For filtration, filter traps fine particles of 10 microns
Housing is constructed of heavy steel body
Suction unit with built-in polishing motor
The health of the user & environment cleanliness is our main aim
Very silent machine
ln-built PL tube for lighting
Rotary switch for operation
Maximum wheel size 4 inches diameter

 

Compact Repair Table For Filing & Polishing- CRT1

SPECIFICATION OF CRT 1:
Suction motor : 1/2 hp, 440V
Starting Amp: 1.7
Running Amp: 1.1
Bench polisher: 3/ohp, 440V
Starting Amp: 2
Running Amp: 1.5
CFM: 250
Sound Level: 50 db Approx.
DIM: 63" x 24" x 48" LxBxH Approx.

FEATURES OF CRT 1:
Bench polishing motor
Exclusive wooden Laminated Top
Pocket Cloth Filter, 7 to 10 microns
Common Dust Collector for Filing & polishing
Aerodynamically designed hood
PL light with toggle switch on hood
Tube light with Flexible arm for Filling Table
Foot shaker lever for dusting the dust in tray
ln-built silencer for noise reduction
Provision for steaming & ultrasonic machines
Highly Useful facility for Jewellery Showrooms & Factories
Provision for micro motor and hand pieces

 

 

Dust Collector For Four Station-DC4
Dust Collector For Four Station-DC4

SPECIFICATION OF DC 4:
1.5 hp
440 volts
Also available in single phase 220 volts
CFM :Around 150 per station.
Sound Level : 65 db approx.
Machine available with automatic vibrating system for filter assembly
Vibrating motor : 1/4 hp, 220 volts

FEATURES OF DC 4:
Very strong suction
Pocket type cloth filter of 5 to 10 microns
This machine can cater to three to four stations of polishing / filing
ln-built silencer for noise reduction
Locking facility
4" dia outlet
Foot shaker for dusting the dust in tray
Dim: 24" X32" X 30' (L X B X H) Approx.